Hänel Lean-Lift System


Simply ingenious...


The Hänel Lean-Lift system with vertical lift technology. The Lean-Lift uses available room heights, similar to high bay racking.

Unlike high bay racking, however, the Lean-Lift stores the parts without any loss of storage space, by means of height optimization. This results in maximum storage capacity on a minimum footprint. An economic solution, convincing to all.
  

 

  

The Hänel Lean-Lift® Principle
Vertical lift Technology - simple yet powerful

The automated 'high-bay warehouse in a cabinet'

The Lean- Lift® from Hanel is both storage efficiency and goods protection in one: at the center of the 'cabinet' is a computerized lift - called the 'extractor'.

In front and behind it are the storage shelves. This is where the articles are stored in containers.

The storage locations are accessed through electronic control by the extractor. It stores or retrieves the container requested. The system is operated comfortably at the optimum ergonomic height at the retrieval zone.

 

The Pluses

  • Over 60 % more storage capacity!
  • Optimum storage capacity, due to height-optimized storage!
  • Storage and handling of bulky and heavy parts!
  • Load-carrying capacity per container up to 1,000 kg/2,208Ibs!
  • Load-carrying capacity per Lean-Lift up to 60,000 kg / 132,450 Ibs (tested statics)!
  • Material to operator, not operator to material: this saves time!
  • Protection of stored articles!
  • High efficiency and cost savings!
  • Storage of dissimilar sized items!


Hanel Lean-Lift®
in a high-speed version
Lean-Lifts with a container load capacity of up to 500 kg/1,104Ibs, now in a high-speed version.

Vertical speed:
with empty extractor 2.3 m/sec,
with loaded extractor 1 m/sec!

Horizontal speed:
jolt-free 0.5 m/sec!


 

 

 

  1. The 'Extractor' stores and retrieves the articles
  2. 4-chain-system for optimum guidance of the extractor
  3. Storage locations with stored articles
  4. Container for holding and transporting the articles
  5. Integrated frame profile for height-optimized placement of the containers
  6. Soft start control with frequency converter
  7. Self-monitoring light barriers in BWS-S design
  8. Lockable sliding doors for article protection
  9. Environmentally friendly powder-based finish ensures
    50 % higher scuff resistance
  10. Hanel microprocessor control unit on movable Vario-arm
  11. Wiring cabinet - the electronics are easy to access
  12. Photo-sensors for height
    detection to measure article heights and safety
  13. Service door
    conveniently positioned at the side


Hanel Lean-Lift Technical Data

Model
Lift dimensions in inches
Container size in inches
Load capacity in lbs
  
Depth
Width *
Width
Depth
 
1300-635
  
88.19
63.98
 
51.18
25.00
 
618 / 1.100
  
1640-635
  
88.19
77.40
 
64.57
25.00
 
550 / 1.100
  
2060-635
  
88.19
93.90
 
81.10
25.00
 
550 / 1.100
  
2300-635
  
88.19
103.35
 
90.55
25.00
 
550 / 880 / 990
  
2460-635
  
88.19
109.65
 
96.85
25.00
 
550 / 880 / 990
  
2860-635
  
88.19
125.39
 
112.59
25.00
 
550 / 880
  
3260-635
  
88.19
141.14
 
128.34
25.00
 
550 / 660
  
840-825
  
110.60
45.90
 
33.00
32.50
 
1.100 / 2.200
  
1300-825
  
110.60
63.98
 
51.18
32.50
 
618 / 1.100 / 2.200
 
1640-825
  
110.60
77.40
 
64.57
32.50
 
550 / 1.100 / 2.000
  
2060-825
  
110.60
93.90
 
81.10
32.50
 
550 / 1.100 / 1.900
  
2460-825
  
110.60
109.65
 
96.85
32.50
 
550 / 880 / 990 / 1.800
 
2860-825
  
110.60
125.39
 
112.59
32.50
 
550 / 880
  
3260-825
  
110.60
141.14
 
128.34
32.50
 
550
  
840-1270
  
163.40
45.90
 
33.00
50.00
 
550 / 1.100 / 2.200
  
1300-1270
  
163.40
63.98
 
51.18
50.00
 
550 / 1.100 / 2.000
  
1640-1270
  
163.40
77.40
 
64.57
50.00
 
550 / 1.100 / 1.800
  
2060-1270
  
163.40
93.90
 
81.10
50.00
 
550 / 880
  
2460-1270
  
163.40
109.65
 
96.85
50.00
 
550 / 880 / 1.600

Maximum useful load of lift up to 132.480 lbs depending on the model.
A few examples from the wide range of option.
* Add 0.78 inches for the lift taller the 8.5 m.

 

STORAGE CAPACITY

The Hanel Lean-Lift:
decisive advantages over MLS

The Hänel Lean-Lift creates over 60 % more cubic capacity than miniload systems (MLSs) on the same footprint by offering more compact, height-optimized storage.


The pluses

  • Improved capacity utilization due to height-optimized storage!
  • Over 60 % more storage capacity!
  • Step-by-step expansion of storage capacity!
  • Several operators can work and use it simultaneously!
  • Retrieval times are considerably shorter!
  • Decentralized storage



MLS: Miniload
System



Hanel Lean-Lift

One glance in the Hänel Lean-Lift shows the advantages clearly:
Optimum storage of highly varied parts without any loss of space

 

 


Goto Top
Copyright (c) 2012 - ICEC All rights reserved