Machining Center  >  DCX Series  > DCX22

DCX22 Machine
Dual column design promotes thermal stability.


This 2-metre machine with more than 1.75 metres in Y is perfect for large dies, moulds, and parts for aerospace and the energy sector. Additionally, dynamic behaviour of the dual column design is superior to a gantry design because on a gantry machine three axes are far removed from the work area. You can count on quality construction and we use both dynamic and finite element analysis to ensure the DCX22 is a rigid machine you can rely on to get the job done.
  • Frame made of high-grade, cast iron.
  • Design promotes thermal stability.
  • Superior to C-frame design for manufacturing large parts.
  • Integrated Hurco control powered by WinMax® software gives you the competitive advantage you need.
Optimum machine performance is reliant upon installation conditions at the facility, such as power supply, air supply, and ambient air conditions. Machines shown with options. Prices and information may change without notice.
   



DCX22 Features / Options:

  • Coolant / Chip Removal Spindle / Motor Frame
  • Wash Down System High Speed Servo Systems Fully Contained Tool Storage
  • Wash Down Gun and Air Gun Spindle Motor Type Easy Access Side Door with Latch
  • Chip Auger Spindle Chiller Dual Work Lights
  • Chip Conveyor Low Air Pressure Switch E-Stop Button on Control Head
  • Coolant Ring Motor Brake in Z-Axis Linear Rails
  • Top Dome Lube Oil Separator
  • Spindle Coolant Nozzle Linear Glass Scales (X, Y, Z)
  • Telescopic Way Covers Solid One Piece High-Grade Cast Iron Bed
  • Coolant Screen System Door Interlock
  • Air Conditioner
  • Power Cabinet Heat Exchanger

  SPECIFICATIONS

   DCX22-40   DCX22 -50
  Travel  mm 2,200 x 1,700 x 750 2,200 x 1,700 x 750
  Table Size / Pallet Size,  mm 2,100 x 1,600 2,100 x 1,600
  Max Weight on Table, (Kg) 6,000 6,000
  Peak Spindle Motor, hp (Kw) 24 (18)  35 (26) 
  Max Spindle Motor Torque, Nm @ rpm 342 @ 500 555 @ 458
  Rapid Traverse X,Y,Z Axis,  (M) / min 24 15
  Number of Tools Standard 40 CAT (BT) 40 40 CAT (BT) 50
  Positioning,  mm ± 0.01 ± 0.01
  Repeatability,  mm ± 0.005 ± 0.005
  Machine Weight,  (Kg) 20,000 20,510
2,200mm x 1,700mm x 750mm
3,200mm x 2,100mm x 920mm

Goto Top
Copyright (c) 2012 - ICEC All rights reserved