Turning Center  > TMM Series > TMM10

TMM10 Machine


The TMM10 slant-bed lathe with live tooling exemplifies the flexibility of the Hurco integrated control. Setup is a snap and programming is streamlined so you can efficiently produce small to medium size lots of parts that require turning and secondary milling/drilling operations. Not only will you benefit from one setup, you won’t lose accuracy because there’s no need to refixture.
TMM8

Because all of the Hurco lathes are designed as true slant-bed lathes, the weight is on the ball screw, which makes the TMM10 rigid. Also, the weight of the frame is heavier than competitive products.
   



TMM10 Features / Options:

  • Any station can be a live tool.
  • Compatible with VDI40 axial tools.
  • C-Axis standard, not an add-on. Programs to .001 degree.
  • Generous through-hole.
  • Servo turret instead of hydraulic.
  • Front foot pedals to quickly open/close the chuck and engage/disengage the tailstock.
  • Rigid tap 
  • Small footprint
  • Solid, one-piece, fine-grain cast iron bed 
  • High speed 3,000 RPM spindle
  • Powerful 25 hp spindle motor
  • Heavy duty cartridge spindle design
  • Constant surface speed
  • Heavy duty linear rails on both axes
  • Oversized, double nut ball screws
  • Automatic central lubrication system
  • CE Door Switch Assembly
  • Latest AC servo motor and drive technology
  • Robust control and software tools
  • User-friendly, ergonomic control console
  • Max Keyboard
  • Hurco Safety Mat (Fatigue)  
  • Auto Position Tool Pre-Setter
  • Bar Feeder
  • Spindle liners for bar feeder  
  • Tailstock
  • Parts Catcher
  • Collet Chuck
  • Chip Conveyor
  • Hard Jaws (set of 3)
  • ISNC with Macros  
  • Max Classic Package (Includes Touch Screen Shaded Verification Graphics and Stylus)
  • DXF Transfer
  • UltiNet  
  • USB port
  • Wire frame graphics
TMM

  SPECIFICATIONS
TMM10
  X - Z axis travel (mm)
250 x 750
  Swing over cross slide (mm)
402
  Distance between centres (mm)
695
  Maximum cutting Diameter (mm)
295
  Maximum cutting length
700
  Maximum Spindle speed (rpm)
3,000
  Draw tube Diameter
78
  Peak spindle power (HP/KW)
24/18
  Motor Torque (Nm) 1 Min Rate
474@360 RPM
  Rapid Traverse X - Z axis (mm)
19 - 24
  Tool Shank
DVI 40
  Number of Tool positions
12
  3 jaw chuck size (mm)
254
  Turret index time - Adjacent
0.31 sec
  Positioning
+/-0.005
  Repeatability
+/-0.0025
  Tool Holder type
Din 5480
  Tool Turret HP (peak)
8.8HP - 6.6Kw
  Tool Turret Torque (peak)
42Nm
  Max Speed
4,000 RPM
  Base Speed
1,500 RPM
  0 - 5,000 Accel time
0.12 sec
  5,000 - 0 decell time
3.8 sec

VIDEO

Goto Top
Copyright (c) 2012 - ICEC All rights reserved